Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 161 / 278

Version 7.0
G-30-1781-en
Page 161
S100 / OPMI pico Operation
PAL / NTSC Selection submenu
In the "PAL/NTSC" submenu, you can switch between PAL and NTSC format.
Proceed as follows to switch on the PAL / NTSC SELECTION:
• Press the "config" key for approx. 5 seconds to access the installation
menu.
• Select menu item "PAL / NTSC SELECTION" in the installation menu using
the control keys and press the "enter" key.
 The following menu appears:
• Use the control keys to select the required mode.
 The selection is displayed with an arrow.
 The properties of each format are explained at the bottom of the
screen.
• Press the "enter" key to save the changes.
 The selection is saved and you return to the installation menu.
• If you do not want to save any changes, select menu item "CANCEL" to
return to the installation menu. As a result, the image display on the
screen will be reset to the setting present when the submenu was opened.
After you have saved the changes, the settings are applied and the camera is
restarted.
PAL / NTSC SELECTION
 PAL
NTSC
CANCEL