Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 162 / 278

Operation S100 / OPMI pico
Version 7.0
Page 162 G-30-1781-en
LIGHT SOURCE
In the "LIGHT SOURCE" submenu, you can select between XENON / LED and
HALOGEN.
• Press the "config" key for approx. 5 seconds to access the installation
menu.
• Select menu item "LIGHT SOURCE" from the installation menu using the
control keys and press the "enter" key.
 The following menu appears:
• Use the control keys to select the required mode.
 The selection is displayed with an arrow.
 The properties of each format are explained at the bottom of the
screen.
• Press the "enter" key to save the changes.
 The selection is saved and you return to the installation menu.
• If you do not want to save any changes, select menu item "CANCEL" to
return to the installation menu. As a result, the image display on the
screen will be reset to the setting present when the submenu was opened.
LIGHT SOURCE
 XENON / LED
HALOGEN
CANCEL
SETUP CAMERA FOR XENON OR LED LIGHT SOURCES