Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 142 / 278

Operation S100 / OPMI pico
Version 7.0
Page 142 G-30-1781-en
Proceed as follows to select an exposure control and to load the respective
configuration:
• Press the <config> key to access the configuration menu.
• Use the control keys to select the "BRIGHTNESS" menu item in the con-
figuration menu and press the <enter> key.
 The following menu appears:
The values marked with * are only examples.
• Select the desired mode with the control keys.
 The selected choice is displayed with an arrow.
 The selected mode is explained at the lower end of the display.
• You can use the control keys to change the settings.
• Press the <enter> key to save the changes.
 The selection is saved and you return to the configuration menu.
• If you do not want to save your changes, return to the configuration menu
via the "CANCEL" menu item. The mode is set as it was when the sub
menu was accessed.
BRIGHTNESS MODE
 AUTOMATIC 80%*
LOW LIGHT AUTO 80%*
MANUAL 1/16*
CANCEL
SET POINT FOR AUTOMATIC BRIGHTNESS REGULATION