Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 76 / 278

System Overview S100 / OPMI pico
Version 7.0
Page 76 G-30-1781-en
Button functions of the HD video control units
Depending on the integrated video camera selected, the supply unit contains
different video control units:
For the integrated SD video camera
– Integrated HD 720p control unit
– Integrated video camera live & streaming control unit
with SW recording license (optional SW license)
The area to the right of the dashed line is displayed with a 90° rotation. It is
located at the level of the connector panel
.
1 Config
Use the <config> key to go to the menu.
The configuration menu permits you to set various function sequences to
meet your specific needs. The different possible settings in the configura-
tion of the application program are explained in the chapter "Operation"
(Page 127). The camera is delivered with a default configuration (factory
settings).
2 Indicator light (integrated HD 720p control unit)
The indicator light (LED) is lit when the power switch has been turned on.
3 Indicator lights (integrated video camera live & stream control unit)
The indicator light "power" is lit when the power switch has been turned
on.
The "network" indicator light flashes during network data transmission,
The indicator lamp "record" is lit when recording a video.
4 White bal
White balance for integrated HD 720p control unit (Page 165)
and for the integrated video camera live & streaming control unit
(Page 185)
5 Brightness (integrated HD 720p control unit)
You can use the
and keys to adjust the brightness of the video
image.
The configuration menu () gives you the choice between two different
modes: Automatic - Manual.
6 Brightness (integrated video camera live & streaming control unit)
Use the <brightness> key to go to the "Brightness" menu (Page 182)
where you can configure settings.