Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 247 / 278

Version 7.0
G-30-1781-en
Page 247
S100 / OPMI pico System Data
Electromagnetic immunity for ME equipment and ME systems
The S100 / OPMI pico is intended for operation in an electromagnetic environ-
ment as specified below. The customer or the user of the S100 / OPMI pico is
responsible for ensuring that the device is operated in such an environment.
Immunity
tests
IEC 60601
test level
Compliance level Electromagnetic environment -
guidelines
Electrostatic dis-
charge (ESD) as per
IEC 61000-4-2 ±6 kV
contact discharge
±8 kV air discharge
±6 kV
contact discharge
±8 kV
air discharge
Floors should be made of wood or
concrete or be covered with ceramic
tiles. If the flooring contains synthetic
materials, the relative humidity must
be at least 30%.
Fast transient/burst
immunity as per
IEC 61000-4-4 ±2 kV for
power supply lines
±1 kV for
input/output lines ±2 kV for
power supply lines
±1 kV for
input/output lines The quality of the supply voltage
should be that of a typical business or
hospital environment.
Surges as per
IEC 61000-4-5 ± 1 kV phase-to-neutral
voltage
± 2 kV phase/neutral to
ground voltage ± 1 kV phase-to-neutral
voltage
± 2 kV phase/neutral to
ground voltage The quality of the supply voltage
should be that of a typical business or
hospital environment.
Voltage dips, short
interruptions and
voltage variations
as per
IEC 61000-4-11 < 5% UT
(> 95% dip of UT) for
0.5 cycle < 5% UT
(> 95% dip of UT) for
0.5 cycle The quality of the supply voltage
should be that of a typical business or
hospital environment. If the user of
S100 / OPMI pico requires continued
function even in the event of inter-
ruptions in the power supply, we rec-
ommend to power the device S100 /
OPMI pico from an uninterruptible
power supply or a battery.
40% UT
(60% dip of UT) for 5 cy-
cles 40% UT
(60% dip of UT) for 5
cycles
70% UT
(30% dip of UT) for 25
cycles 70% UT
(30% dip of UT) for 25
cycles
< 5% UT
(95% dip of UT) for 5s < 5% UT
(95% dip of UT) for 5s
Power frequency
(50/60Hz) mag-
netic field as per
IEC 61000-4-8 3 A/m 3 A/m Power frequency magnetic fields
should be at levels typical of business
and hospital environments.
NOTE: UT is the AC supply voltage prior to application of the test level.