Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 92 / 278

Preparations for use S100 / OPMI pico
Version 7.0
Page 92 G-30-1781-en
Mounting the surgical microscope
After you have mounted the OPMI pico, the suspension arm may move
downwards. Prevent the OPMI pico from knocking against anything.
The adjustment screw (1) on the suspension arm of the S100 suspension
system only acts as a brake but has no locking function.
Without coupling
• Tighten adjustment screw (1) (braking function).
• Insert the shaft (5) into the the suspension arm's holding fixture.
• Screw in and tighten the safety screws (2) and (4).
• The safety screw (2) contains a hex socket head screw (3), which is an ad-
ditional safety screw. Tighten it.
Including 120° coupling
• Tighten adjustment screw (1)(braking function).
• Insert the shaft (6) into the mount of the suspension arm.
• Screw in and tighten the safety screws (2) and (4).
• The safety screw (2) contains a hex socket head screw (3). This is an addi-
tional safety screw. Tighten it.
• Insert shaft (5) into the holding fixture of the coupling. Position and tight-
en the safety screws (7) and (8).
• Securing screw (8) contains a hex socket head screw (9) which is an addi-
tional securing screw. Tighten it.
Including K 0/120 coupling
We recommend using the K 0/120 coupling for gynecological procedures.
This makes it possible to shift the working area downwards by 115 mm.
• Tighten adjustment screw (1)(braking function).
• Insert the shaft (10) into the the suspension arm's holding fixture.
• Screw in securing screws (2) and (4). Tighten it.
• Securing screw (2) contains a hex socket head screw (3) which is an addi-
tional securing screw. Tighten it.
• Insert shaft (5) into the holding fixture of the coupling. Position and tight-
en the safety screws (11).