Zeiss 000000-1080-349, Инструкция по эксплуатации

Страница: 195 / 278

Version 7.0
G-30-1781-en
Page 195
S100 / OPMI pico Operation
Network
In the "Network" tab you can set your network configurations.
Fig. 88: Network
1 IP Settings
MAC Address
The MAC Address (Media Access Control Address) is the hardware address
of each individual network adapter that serves as a unique identification
of the device in a computer network if required. The unique MAC address
is required to create a SW recording license.
DHCP activated:
Network link via a dynamic IP address "DHCP"
A dynamic IP address is an IP address which is automatically assigned to
the requesting device by an address service (DCHP server) available in the
network.
After applying the activated DHCP, you can read out the values trans-
mitted from the DHCP server using the buttons IP Address, Subnet Mask
and Standard Gateway.
DHCP deactivated:
Network connection via a static IP address.
Static IP addresses are fixed IP addresses, permanently assigned to a
system. You can obtain the data required for this purpose (IP address,
subnet mask and standard gateway) from your IT Administrator.
• Enter the data and use "Apply" to activate the changes.
For more detailed information on the network configuration, see "Config-
uring the Network Connection (default settings)" onPage 197 .
2 Network share*
The recorded video and image data can be saved in a "network folder"“
in a computer on the network.
1
*2
4
3