YOKOGAWA UP35A, Руководство пользователя

Страница: 66 / 412

6-5
IM 05P02D41-01EN
Monitoring and Control of Regular Operations
6
TSP Display
Remaining Segment-time Display
Segment Number Display
Remaining Repetition Display
Program Pattern Display
program pattern (overview)
Can be changed by parameter PTSL.
Soak and ramp display
Displays "SSP" during reset-mode.
Displays "L.SP" during local-mode operation.
Displays during program operation.
Displays during program operation.
When the pattern number is 0, 0/0 is displayed.
When pattern number is
0, pattern is not
displayed.
SP Display
PID Number Display (display only)
(Factory default: non-display)
SELECT Displays 1 to 5
(Displayed only when SELECT Display is registered.
(The figure on the left is the example of
the parameter A1 (alarm-1 setpoint).)
(Factory default: non-display)
Position Proportional Computation Output Display
Valve Position Display (display only)
Dispalys the number of remaining repetitions (R.CYC) on Setpoint display.
This display is displayed only when the repeat function is set and the
operation mode is PROG.
Analog Input Displays (display only)
(Factory default: non-display)
PV: PV analog input
(UP35A only)
(UP35A only)
6.1 Monitoring and Control of Operation Displays