YOKOGAWA UP35A, Руководство пользователя

Страница: 285 / 412

13-18
IM 05P02D41-01EN
(Continued)
Setpoint Function Action
Availability
RST RUN PTN MODE
LAT Latch release
Latch 1 to latch 4 are released every time the user
function key is pressed.
√ √ √ √
PID PID Tuning switch
Pressing the function key during operation
displays the first parameter (proportional band) of
the currently selected PID parameter group and
enables the setting to be changed.
As with the operation to change the parameter
setpoint, the sequence is P→I→D→…→P→….
Pressing the function key again, or pressing the
DISPLAY key or DISP key returns to the initial
Operation Display.
The PARAMETER key or PARA key does not
switch to the Menu Display.
√ √ √ √
PTN
Program pattern number
selection
Program pattern is selected every time the user
function key is pressed.
√ √ √√ √
MODE Operation mode
The operation mode parameters are displayed
every time the user function key is pressed.
√ √ √ √√
Note 1: √ indicates available, – indicates unavailable, and √√ indicates initial value.
► Contact input: 12.1 Setting Contact Input Function
Status of user function key
The status of the user function key can be identified by communication.
“1” can be read while the user function key is held down, and “0” can be read when the
user function key is released. (Initial value: 0)
► Reading via communication: UTAdvanced Series Communication Interface User’s Manual
MODE key operation in the Parameter Setting Display
In the Menu Display and Parameter Setting Display, the guide is displayed on PV display.
At this time, use the MODE key to turn on and off the guide display on PV display. A
measured input value (PV) is displayed in the ON state.
13.2 Assigning Function to User Function Key