5-7
IM 701310-17E
Commands
1
2
3
4
5
6
App
Index
Command
Function
Page
Sets the X-axis trace of the XY display or queries the current setting.
Sets the Y-axis trace of the XY display or queries the current setting.
Cancels auto setup that has been executed.
Queries all settings related to the calibration.
Turns ON/OFF the auto calibration or queries the current setting.
Queries all settings related to the channel.
Executes the auto scaling of the channel.
Sets the input filter of the channel or queries the current setting.
Sets the input coupling of the channel or queries the current setting.
Sets the skew correction of the channel or queries the current setting.
Turns ON/OFF the display of the channel or queries the current setting.
Turns ON/OFF the inverted display of the channel or queries the current
Queries all settings related to the waveform label of the channel.
Sets the waveform label of channel or queries the current setting.
Turns ON/OFF the waveform label display of the channel or queries the
Turns ON/OFF the offset cancel of the channel or queries the current setting. 5-68
Sets the offset voltage of the channel or queries the current setting.
Sets the vertical position of the channel or queries the current setting.
Queries all settings related to the probe attenuation of the channel.
Sets the probe attenuation of the channel or queries the current setting.
Queries the probe attenuation of the channel when set to AUTO.
Execute the zero adjustment of the current probe of the channel.
Sets the waveform (input/computation) to be assigned to the input channel
or queries the current setting.
:CHANnel<x>:SVALue (Scale VALUE)
Turns ON/OFF the scale display of the channel or queries the current setting. 5-68
Sets the vertical sensitivity (V/div) of the channel or queries the current
Queries all settings related to communications.
Sets whether to add a header to the response to a query (example
CHANNEL1:VOLTAGE:PROBE 10) or not add the header (example 10) or
Pending Status Enable register)
Sets the overlap command that is used by the *OPC, *OPC?, and *WAI
commands or queries the current setting.
Queries the value of the operation pending status register.
Sets the commands to operate as overlap commands or queries the current
Sets remote or local. ON is remote mode.
Sets whether to return the response to a query using full spelling (example
CHANNEL1:VOLTAGE:PROBE 10) or using abbreviation (example CHAN:
PROB 10) or queries the current setting.
5.1 List of Commands