5-132
IM 701310-17E
5.20 SEARch Group
:SEARch<x>:CLOCk:POLarity
Function Sets the polarity of the clock channel or queries the
current setting.
Syntax
:SEARch<x>:CLOCk:POLarity {FALL|RISE}
:SEARch<x>:CLOCk:POLarity?
<x> = 1 or 2
Example
:SEARCH1:CLOCK:POLARITY RISE
:SEARCH1:CLOCK:POLARITY? -> :SEARCH1:
CLOCK:POLARITY RISE
Description • This command is invalid when
:SEARch<x>:
CLOCk:SOURce NONE.
• This command is valid when
:SEARch<x>:TYPE
STATe.
• This command is valid when
:SEARch<x>:
TYPE WIDTh
and
:SEARch<x>:WIDTh:TYPE
PSTAte.
:SEARch<x>:CLOCk:SOURce
Function Sets the clock trace of the search or queries the
current setting.
Syntax
:SEARch<x>:CLOCk:SOURce {<NRf>|NONE}
:SEARch<x>:CLOCk:SOURce?
<x> = 1 or 2
<NRf> = 1 to 8
Example
:SEARCH1:CLOCK:SOURCE NONE
:SEARCH1:CLOCK:SOURCE? -> :SEARCH1:
CLOCK:SOURCE NONE
Description • This command is valid when
:SEARch<x>:TYPE
STATe.
• This command is valid when
:SEARch<x>:TYPE
WIDTh
and
:SEARch<x>:WIDTh:TYPE PSTAte.
:SEARch<x>:DECimation
Function Sets the decimation detection of the skip mode or
queries the current setting.
Syntax
:SEARch<x>:DECimation {<NRf>}
:SEARch<x>:DECimation?
<x> = 1 or 2
<NRf> = 1 to 9999
Example
:SEARCH1:DECIMATION 1
:SEARCH1:DECIMATION? -> :SEARCH1:
DECIMATION 1
:SEARch<x>?
Function Queries all settings related to the search function.
Syntax
:SEARch<x>?
<x> = 1 or 2
Example
:SEARCH1? -> :SEARCH1:CLOCK:SOURCE 1;
POLARITY FALL;:SEARCH1:DECIMATION 1;
HOLDOFF 0.000E+00;LOGIC AND;
POLARITY RISE;SMODE OFF;SPATTERN:CLOCK:
MODE 1;POLARITY FALL;SOURCE 1;:SEARCH1:
SPATTERN:CS 1;LATCH:TRACE 1;
POLARITY FALL;:SEARCH1:SPATTERN:SETUP:
BITRATE 1.000E+00;
PATTERN "1100110111101111";:SEARCH1:
SPOINT -5.000E+00;STRACE 1;TRACE1:
CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE2:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE3:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE4:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE5:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE6:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE7:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TRACE8:CONDITION DONTCARE;
HYSTERESIS 1.000E+00;LEVEL 0.000E+00;:
SEARCH1:TYPE EDGE;WIDTH:MODE OUT;
TIME1 1.000E+00;TIME2 2.000E+00;
TYPE PULSE
:SEARch<x>:ABORt
Function Aborts the search.
Syntax
:SEARch<x>:ABORt
<x> = 1 or 2
Example
:SEARCH1:ABORT
:SEARch<x>:CLOCk?
Function Queries all settings related to the clock channel.
Syntax
:SEARch<x>:CLOCk?
<x> = 1 or 2
Example
:SEARCH1:CLOCK? -> :SEARCH1:CLOCK:
SOURCE 1;POLARITY RISE