5-18
IM 701310-17E
Command
Function
Page
Sets the edge detection level of the count computation or queries the current
Queries all settings related to the computation unit.
Sets the computation unit or queries the current setting.
Sets the automatic/manual addition of the computation unit or queries the
Queries all settings related to user-defined math or queries the current
Executes auto ranging for user-defined math.
:MATH<x>:USERdefine:CONStant<x>
Sets a user-defined math constant or queries the current setting.
Sets a user-defined math equation or queries the current setting.
Cancels history computation for user-defined math.
Executes history computation for user-defined math.
Queries all settings related to the automated measurement of waveform
Queries all settings related to calculation items.
Turns ON/OFF all calculation items.
:MEASure:CALCulation:COUNt<x>?
Queries the statistical processing count of the calculation item.
:MEASure:CALCulation:DEFine<x>
Sets the equation of the calculation item or queries the current setting.
:MEASure:CALCulation:{MAXimum<x
>|MEAN<x>|MINimum<x>|SDEViation
Queries the statistical value of the calculation item.
Turns ON/OFF the calculation item or queries the current setting.
:MEASure:CALCulation:VALue<x>?
Queries the automated measured value of the calculation item.
Queries all settings related to the continuous statistical processing.
Sets the continuous statistical processing count or queries the current
Restarts the continuous statistical processing.
Queries all settings related to the cycle statistical processing.
Aborts the execution of the cycle statistical processing.
Executes the cycle statistical processing. This is an overlap command.
Sets the cycle source trace of the continuous statistical processing count or
Turns ON/OFF the display of the automated measurement of waveform
parameters or queries the current setting.
Aborts the execution of the statistical processing of the history data.
Executes the statistical processing of the history data. This is an overlap
Sets the mode of the automated measurement of waveform parameters or
Queries all settings related to the threshold levels of the automated
measurement of waveform parameters.
Queries the threshold levels of the trace.
Sets the detection mode when the auto setting of the threshold level is
enabled or queries the current setting.
Queries all settings related to the level and hysteresis of the threshold level. 5-124
Sets the hysteresis of the threshold level or queries the current setting.
Sets the level of the threshold level or queries the current setting.
Sets the setup mode of the threshold level or queries the current setting.
Queries all settings related to the upper and lower limits of the threshold
Sets the upper and lower limits of the threshold level or queries the current
Queries all settings related to the trace.
Queries all settings related to the area.
5.1 List of Commands