background image

5-70

IM 701310-17E

5.8  COMMunicate Group

 

The commands in this group deal with communications.  There are no front panel keys that correspond to the commands in 
this group.

:COMMunicate:OPSR? (Operation Pending 

Status Register)

Function  Queries the value of the operation pending status 

register.

Syntax

 

:COMMunicate:OPSR?

Example

  :COMMUNICATE:OPSR? -> 0

Description For details on the operation pending status register, 

see the figure for the

 :COMMunicate:OVERlap

 

command.

:COMMunicate:OVERlap

Function  Sets the commands to operate as overlap commands 

or queries the current setting.

Syntax

 

:COMMunicate:OVERlap <Register>

 

:COMMunicate:OVERlap?

 

<Register> = 0 to 65535

Example

  :COMMUNICATE:OVERLAP 65535

 

:COMMUNICATE:OVERLAP? -> :COMMUNICATE:
OVERLAP 2400

Description •  In the above example, all bits are set to 1 to make 

all overlap commands applicable.  However, bits 
fixed to 0 are not set to 1.  Thus, the response to 
the query indicates 1 for bits 5, 6, 8, and 11 only.

 

•  For the description of how to synchronize the 

program using 

:COMMunicate:OVERlap

, see 

page 4-7.

 

•  In the above example, bits 5, 6, 8, and 11 are set to 

1 to make all overlap commads applicable .

 

Operation pending status register/overlap enable 
register

 

15 14 13 12 11 10

9

8

7

6

5

4

3

2

1

0

0

0

0

0 SCH 0

0 HST 0 ACS

0

0

0

0

0

PRN

 

When bit 5  (PRN) = 1:

 

 

Built-in printer operation not complete

 

When bit 6  (ACS) = 1:

 

 

Access to the medium not complete.

 

When bit 8  (HST) = 1:

 

 

History search execution not complete

 

When bit 11  (SCH) = 1:

 

 

Search execution not complete

:COMMunicate?

Function  Queries all settings related to communications.
Syntax

 

:COMMunicate?

Example

  :COMMUNICATE? -> :COMMUNICATE: 

HEADER 1;OPSE 352;OVERLAP 352;VERBOSE 1

:COMMunicate:HEADer

Function  Sets whether to add a header to the response to a 

query  (example CHANNEL1:VOLTAGE:PROBE 10) 
or not add the header  (example 10) or queries the 
current setting.

Syntax

 

:COMMunicate:HEADer {<Boolean>}

 

:COMMunicate:HEADer?

Example

  :COMMUNICATE:HEADER ON

 

:COMMUNICATE:HEADER? -> :COMMUNICATE:
HEADER 1

:COMMunicate:LOCKout

Function  Sets or clears local lockout.
Syntax

 

:COMMunicate:LOCKout {<Boolean>}

 

:COMMunicate:LOCKout?

Example

  :COMMUNICATE:LOCKOUT ON

 

:COMMUNICATE:LOCKOUT? -> :COMMUNICATE:
LOCKOUT 1

Description This command is dedicated to the USB and Ethernet 

interface (option).

:COMMunicate:OPSE (Operation Pending 

Status Enable register)

Function  Sets the overlap command that is used by the *OPC, 

*OPC?, and *WAI commands or queries the current 
setting.

Syntax

 

:COMMunicate:OPSE <Register>

 

:COMMunicate:OPSE?

 

<Register> = 0 to 65535, :COMMunicate:OVERlap

 

See the command diagram.

Example

  :COMMUNICATE:OPSE 65535

 

:COMMUNICATE:OPSE? -> :COMMUNICATE: 
OPSE 2400

Description In the above example, all bits are set to 1 to make all 

overlap commands applicable.  However, bits fixed 
to 0 are not set to 1.  Thus, the response to the query 
indicates 1 for bits 5, 6, 8, and 11 only.

Содержание DL9040 Series

































































































































































































































































Отзывы: