YOKOGAWA CA700-01, Руководство пользователя, Страница: 75 / 107

5-7
IM CA700-01EN
1
2
3
4
5
6
7
Index
Remote Control
[CP command] Sets the adjustment point.
CP Sets the adjustment point. Normal Adjustment
Command = CPm<CRLF> → Answer = CPm<CRLF>
Parameters
m = 0: +FS adjustment
1: +zero adjustment
2: –FS adjustment
3: –zero adjustment
4: +FS adjustment (monitor measurement)
5: +zero adjustment (monitor measurement)
No Yes
[CR command] Sets or queries the source adjustment value for adjustment.
CR Sets or queries the source adjustment value for adjustment. Normal Adjustment
Command = CRm<CRLF> → Answer = CRm<CRLF>
Command = CR?<CRLF> → Return = CRm<CRLF>
Parameters
m = 18.000 to +22.000 (DCmA FS adjustment)
m = –0.200 to +0.200 (DCmA zero adjustment)
m = 18.000 to +22.000 (DCmA SIMULATE FS adjustment)
m = 0.900 to +1.100 (DCmA SIMULATE zero adjustment)
m = 4.5000 to +5.5000 (DCV FS adjustment)
m = –0.0500 to +0.0500 (DCV zero adjustment)
No Yes
[CS command] Sets the measurement value for adjustment.
CS Sets the measurement value for adjustment. Normal Adjustment
Command = CS<CRLF> → Answer = CS<CRLF>
In the measurement adjustment condition, the current input measured
values are set as the measurement adjustment values for the selected
function, range, and scale (+FS/+0/-0/-FS).
No Yes
[CSF command] Queries the source function for adjustment.
CSF Queries the source function for adjustment. Normal Setting
Command = CSF?<CRLF> → Return = CSFm<CRLF>
Parameters
m = 0: DCV
12: DCmA
16: DCmA SIMULATE
When the function is set to measurement, ERR13 is returned.
No Yes
[CW command] Writes adjustment data.
CW Writes adjustment data. Normal Adjustment
Command = CW<CRLF> → Answer = CW,OK<CRLF> (normal
completion)
Writes the adjustment data to the data flash memory after performing
adjustments for each function and range.
If you turn off the CA700 without executing this command, the values
adjusted immediately before will be discarded.
No Yes
5.4 Commands