manualshive.com logo in svg

YOKOGAWA CA700-01, Руководство пользователя, Страница: 64 / 107

Поделиться
Скачать
YOKOGAWA CA700-01 Скачать руководство пользователя страница 64

4-5

IM CA700-01EN

1 

2 

3 

4 

5 

6

7

Index

Saving and Deleting Data

4.

 Press 

Delete (F1)

. A confirmation message will appear. Press 

ENTER

. The selected files will 

be deleted. To cancel deleting, press 

ESC

.

 

Explanation

You can delete files that are saved in the CA700 internal memory.
You cannot save more than 100 files of each type of data: Save data files, Logging data files, and 
calibration data files. In addition, you cannot save more than 250 files total.
If the maximum number of files that can be saved is reached, you must delete some files.

Copying Files

Before deleting files, copy the important files using one of the following two methods.
•  Copy to a USB storage device (see section 4.3)
•  Connect the CA700 to a PC through USB, and on the PC, copy the files in the CA700 to a 

separate storage device (see section 5.4).

4.2  Deleting Files

Содержание CA700-01












































































































Отзывы:

Нет отзывов