4-1
IM CA700-01EN
Chapter 4
Saving and Deleting Data
1
2
3
4
5
6
7
Index
Saving and Deleting Data
4.1 Setting How to Save Measured Data
This section describes the procedure for setting how to save the pressure, DC current, and DC voltage
data that was measured in sections 2.1 and 2.4.
Procedure
1.
From the top menu, use the ▲ or ▼ key to select
Device Setting
, and press
ENTER
.
2.
On the Device Setting screen, use the ▲ or ▼ key to select
Data Save Setting
, and press
ENTER
.
Set the save method.
Set the data save interval (valid for Logging).
Set the number of data values to save
(valid for Logging).
Confirms the settings
Setting the Save Method
3.
Press the ▲ or ▼ key to select
Logging Method
.
Save and Logging appear on the function menu.
4.
Press
Save (F1)
or
Logging (F2)
.
If you select Save, the setting is complete. Proceed to step 9.