manualshive.com logo in svg

YOKOGAWA CA700-01, Руководство пользователя, Страница: 36 / 107

Поделиться
Скачать
YOKOGAWA CA700-01 Скачать руководство пользователя страница 36

Source and Measure

Sweeping

The CA700 can vary the source value in the range defined by the lower and upper span limits. You can 
vary the source value stepwise or linearly.

Step (Step)

  The CA700 varies the source value in steps from the lower to the upper span limit.

Linear (Linear)

  The CA700 varies the source value linearly from the lower to the upper span limit.

Span (Span Lower, Span Upper)

You can set the source range. The source range is defined by the 0% (Lower) and 100% (Upper) 
values that you specify.

Number of Divisions (Number Of Points)

When sweeping in steps, set the number of divisions between the lower and upper span limits.

Source Time (Time Per Step)

When sweeping in steps, set the duration of each step. When sweeping linearly, set the duration for 
the source value to change from 0% to 100%.

Sweeping in Steps

  

Duration of each step 

Upper span limit

Lower span limit

Sweeping Linearly

  

Upper span limit 

Lower span limit

Source time

Repeat Mode (Repeat Mode)

There are two repeat modes: Single Shot and Cont (Continuous).
  Single Shot:  The source changes from 0% to 100% to 0% and stops.
  Cont:     The source repeats the sweeping from 0% to 100% to 0%.

Saving Data

You can save the source value along with the pressure measurement data.
For details, see sections 4.1 and 2.1.

2.3  Generating DC Current and DC Voltage

2-17

IM CA700-01EN

1 

2 

3 

4 

5 

6

7

Index

Содержание CA700-01












































































































Отзывы:

Нет отзывов