YOKOGAWA CA700-01 Скачать руководство пользователя страница 63

Страница: 63 / 107

4-4

IM CA700-01EN

4.2 Deleting Files

Procedure

From the top menu, use the ▲ or ▼ key to select

File

, and press

ENTER

Use the ▲ or ▼ key to select

File Utility

, and press

ENTER

Use the ▲ or ▼ key to select the file to delete. Press

or to scroll by pages.

To select multiple files, use the ▲ or ▼ key to select the file you want to delete, and then press

ENTER

. A check mark appears next the name of the file to indicate that it will be deleted.

Likewise, select other files that you want to delete.

To clear a check mark, press

ENTER

again.

Pressing

Toggle Sel (F4)

will clear check marks from all files that have them and add check

marks for all files that do not.

To clear all selections, press

Reset Sel (F5)

To select all files, press

Reset Sel (F5)

and then

Toggle Sel (F4)

Number of selected files

Executes deleting

Clears all selections

Marks indicating selected files

Unselects all selected files and selects all

unselected files

Содержание CA700-01












































































































Результаты поиска

Содержание CA700-01

Отзывы:

YOKOGAWA CA700-01, Руководство пользователя, Страница: 63 / 107

Результаты поиска

Содержание CA700-01

Отзывы: