YOKOGAWA CA700-01 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 107

YOKOGAWA CA700-01 Скачать руководство пользователя страница 67

4-8

IM CA700-01EN

4.3 Copying Files to a USB Storage Device

Explanation

Setting the USB Connection

The CA700 has a USB port for hosts (A type) and another for functions (mini-B type). Select which
connector you want to use. You cannot use the two ports simultaneously.
USB for host:

Select this option when connecting a USB storage device to the CA700.

USB for function:

Select this option when connecting the CA700 to a PC. This is for controlling the
CA700 from a PC using communication commands and for using the CA700 as a
mass storage device on the PC.

Icon

When USB Connection is set to Host, the

icon appears on the screen.

Connecting a USB Storage Device

When you connect a USB storage device to the CA700 USB port, note the following points.
• The only USB storage device that the CA700 can use is USB memory device. Do not connect other

types of USB storage devices.

•  Use USB memory devices that are compatible with USB Mass Storage Class version 1.1.
•  Connect the USB memory device directly, not through a USB hub.
•  If you turn on the CA700 with a USB memory device connected, the CA700 may not run properly.

In such a case, turn off the power once, remove the USB memory device, and then turn it on again.
After turning off the power, wait at least 10 seconds before you turn it back on.

• Do not remove and connect a USB memory device at short intervals. Provide a 10-second interval

between removal and connection.

• It takes 20 to 30 seconds after you turn the CA700 on until you can start using the keys. Do not

remove or connect a USB memory device during this period.

• You can connect only a single USB memory device to the CA700.

«
...
65
66
67
68
69
...
»

Содержание CA700-01












































































































Отзывы:

Нет отзывов