6-4
IM AQ1200-01EN
Deleting Markers or the Cursor
3.
Press the
Auxiliary Function
soft key shown on page 6-2 to display the following screen.
Delete the markers.
Delete the cursor.
Note
For details on the marker modes, see section 5.5.
Displaying Markers (Marker mode: Line)
1.
Using the
rotary knob
and
ENTER
, select
OTDR
.
2.
Press the
Marker
soft key to display the following screen.
Press to switch to the screen that is
used to measure the two-point markers.
See “2 Point” later in this section.
Press to switch to the screen that is
used to measure the five-point markers.
See “5 Point” later in this section.
Switches to the screen that is used to
move the measurement reference point
Switches to the screen that is used to
delete markers and the cursor
A marker measurement outline is
displayed on the screen. For details, see
“Explanation” later in this section.
6.1 How to Operate the Cursor and Markers