7-5
IM AQ1200-01EN
Event
Analysis
7.2 Editing Waveforms
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
Explanation
Inserting Events
• The event list can display up to 100 events.
• If you insert an event between two events that are displayed, the new event takes on the number
that follows the event on the left, and all subsequent event numbers are increased by one. You
cannot insert events to the left of the S point.
• You cannot insert events to the left of the distance reference. You can use the Distance Ref Setup
soft key to move the distance reference. For details about the distance reference, see section 6.3.
• If you insert an event to the right of the E event, the inserted event becomes the E event, and a new
number is assigned to the former E event.
Deleting Events
• If only the S point and the E event are displayed, you cannot delete any events.
• If you delete an event, the subsequent event numbers will all be reduced by one.
• You cannot delete the S point.
• If you set a distance reference (R point), the S point disappears from the screen. In this situation,
the measurement reference point is the distance reference. If you delete the distance reference, the
S point is displayed again at its original position.
• If you delete the E event, the event that has the largest number becomes the E event.
