5-10
IM AQ1200-01EN
Approximated Lines
In the 4 Point or 5 Point marker modes, you can display the approximated lines that are used to
calculate splice loss or return loss.
Off: Approximated lines are not displayed.
On: Approximated lines are displayed.
Approximated lines
Marker Information
You can display the distance from the measurement reference point to each marker on the waveform
display area.
Off: Marker information is not displayed.
On: Marker information is displayed.
Marker information
Event Auto Zoom
When events have been detected, you can zoom in on the event at the cursor position or the selected
event. Each time that you select a different event, the zoom ratio of the vertical and horizontal axes is
adjusted automatically. For details about event editing, see section 7.2.
Tooltips
You can configure the AQ1200 to display an explanation screen (Tooltip) for each measurement
condition when it is selected.
Off: Tooltips are not displayed.
On: Tooltips are displayed.
Tooltip
5.5 Setting the Waveform Information Display
