16-3
IM AQ1200-01EN
File Operation and Printing
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Index
App
16.2 Saving and Loading Data
File Name Setup Screen
When you are using the OTDR or fault-locator feature
Set the parts of the file name (ID No., Wavelength,
Comment, Company Name, Name, Cable ID, Fiber
ID, Cable Code, Originating Loc, Terminating Loc).
Set the items that will be entered into part , , and
of the file name.
Set the separator ( , _ _ , ~ ~ ,
^ ^ ).
Set the ID number (0 to 9999).
Set the tape number type (Off, a-b(2), a-c(3), a-d(4),
a-e(5), a-f(6), a-g(7), a-h(8)).
Set the tape number start character.
Set, within the specified tape number type range, the
tape number start character that will be attached to the
file name.
Set the comment (up to 30 characters).
To enter a comment, follow the procedure in section
2.4.
File name
The file name that is determined by the above settings
is displayed.
1
2
3
1 2 3
1
2
3
1
2
3
1
2
3
Press to configure the label.
On the screen that appears, enter the values for
the items according to the instructions in section
2.4 and select which items will be displayed on
the screen. The label items are company name,
name, cable ID, fiber ID, fiber type, cable code,
start position, end position, and current data flag.
When you are using a feature other than the OTDR or fault-locator feature
Set the file name format (No., Comment,
C No., No. + Comment).
Set the ID number (0 to 9999).
Specify a comment (up to 30 characters).
To enter a comment, follow the procedure in section 2.4.
File Name
The file name that is produced by the above settings is
displayed.