The
AVS-LFO-2
Voltage Controlled
User Guide
LFO
Thank you for purchasing from AvonSynth
Congratulations on your purchase of a brand new AvonSynth AVS-LFO-2
VC-LFO Eurorack Module. We trust that it will both serve and inspire you
as you create beautiful music with it for years to come.
In order to get the most out of your module, please ensure that you read
this User Guide in its entirety so that you fully understand all of its
functionality, and that you follow all necessary safety directions during use.
Included in the Box
Page 1 of 3
1 x VC-LFO Module
1 x 10 pin to 16 pin
fl
at-cable power cord
4 x M3 Mounting Screws
4 x Nylon Washers
Installation
Step 1: Power your system o
ff
. Place the module in your Eurorack-
compatible rack in any convenient position. A
ffi
x the module to your rails
using the included mounting screws and nylon washers. Neglecting to use
these washers may result in unnecessary marking of the unit.
Step 2: Triple check the polarity of the power connector before connecting
the power cord to your power supply. Ensure that the -12v line marked on
the back of the module connects to the same end of the
fl
at-cable that also
connects to the -12v line on your power supply. While AvonSynth
modules use shrouded connectors that make this process safer and more
reliable, some systems do not conform to this polarity standard, so careful
checking is
always
necessary. Connecting the module with incorrect
polarity can result in irreversable damage done to the module which
cannot be covered by warranty.
Step 3: Power up your system and start patching!
www.AvonSynth.com
