Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 131 / 981

Configuring Basic Features
109

Supported Provisioning Protocols

Configuring a Provisioning Server

Deploying Phones from the Provisioning Server
Why Using a Provisioning Server?
You can use a provisioning server to configure your IP phones. A provisioning server allows for
flexibility in upgrading, maintaining and configuring the phone. Boot files, configuration files
and resource files are normally located on this server.
When IP phones are triggered to perform auto provisioning, it will request to download the
boot files and configuration files from the provisioning server. During the auto provisioning
process, the IP phone will download and update configuration files to the phone flash. For more
information on auto provisioning, refer to
Yealink_SIP_IP_Phones_Auto_Provisioning_Guide_V81
.
The IP phones can be configured to periodically upload the log files to the provisioning server
or specific server, which can help an administrator more easily find the system problem and fix it.
For more information on log files, refer to
Viewing Log Files on page 829 . The IP phones can
also be configured to upload the contact file to the provisioning server or specific server,
avoiding the loss of the local contacts. For more information, refer to
Backing up the Local
Contacts on page 332 .
Supported Provisioning Protocols
IP phones perform the auto provisioning function of uploading log files (if configured),
uploading contact files (if configured), downloading boot files, downloading configuration files,
downloading resource files and upgrading firmware. The transfer protocol is used to download
files from the provisioning server. IP phones support several transport protocols for provisioning,
including FTP, TFTP, HTTP, and HTTPS protocols. And you can specify the transport protocol in
the provisioning server address, for example, http://xxxxxxx. If not specified, the TFTP protocol is
used. The provisioning server address can be IP address, domain name or URL. If a user name
and password are specified as part of the provisioning server address, for example,
http://user:pwd@server/dir, they will be used only if the server supports them.
Note
Configuring a Provisioning Server
The provisioning server can be set up on the local LAN or anywhere on the Internet. Use the
following procedure as a recommendation if this is your first provisioning server setup. For more
A URL should contain forward slashes instead of back slashes and should not contain spaces.
Escape characters are not supported.
If a user name and password are not specified as part of the provisioning server address, the User
Name and Password of the provisioning server configured on the phone will be used.
There are two types of FTP methods—active and passive. IP phones are not compatible with
active FTP.