Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 628 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
606
Parameters Permitted Values Default
Description:
Configures the lowest priority of the multicast paging call that can be received when DND
is activated in phone mode.
1 is the highest priority, 31 is the lowest priority.
0
-Disabled, all incoming multicast paging calls will be automatically ignored when DND is
activated in phone mode.
1
-1
2
-2
3
-3
…
31
-31
If it is not set to 0 (Disabled), the IP phone will receive the incoming multicast paging call
with a higher or same priority than this value and ignore that with a lower priority than this
value when DND is activated in phone mode.
Web User Interface:
Directory->Multicast IP->Ignore DND
Phone User Interface:
None
To configure multicast listening addresses via web user interface:
1.
Click on
Directory
->
Multicast IP
.
2.
Select the desired value from the pull-down list of
Paging Barge
.
3.
Select the desired value from the pull-down list of
Ignore DND
.
4.
Select the desired value from the pull-down list of
Paging Priority Active
.
5.
Enter the multicast IP address(es) and port number (for example, 224.5.6.20:10008) which
the phone listens to for incoming RTP multicast in the
Listening Address
field.
1 is the highest priority and 31 is the lowest priority.
6.
Enter the label in the
Label
field.
Label will appear on the LCD screen when receiving the multicast RTP stream.