Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 711 / 981

Configuring Advanced Features
689
Macro Action Description
Example:
*981135
.
$C<command>$
This is the command. It can appear anywhere in the action
string. Supported commands (or shortcuts) include:

hang up (hu)

hold (h)

waitconnect (wc)

pause <number of seconds> (p <num sec>) where
the maximum value is 10
Example:
4411$Cwc$$Cp10$
defines dialing
4411>>waitconnect>>connected and lasts 10 seconds.
$T<type>$
The embedded action type. Multiple actions can be
defined. Supported action types include:

invite

dtmf

refer
Example:
*338$Tdtmf$
defines sending the *338 by the
type of dtmf.
Note
: We recommend that you always define this field. If
it is not defined, the supplied digits are dialed using
INVITE.
$M<macro>$
The embedded macro. The <macro> string must begin
with a letter. If the macro name is not defined, the
execution of the action string will be ignored.
Example:
$MAA$
means invoking the EDK macro AA.
$S<softkey ID>$
The functionality of performing this action is the same as
that of pressing the desired soft key.
Each soft key has a unique identifier on the IP phone, you
can configure this parameter according to the
system-defined softkey ID. If the softkey ID is not defined
on the phone or there is no matched soft key on the
current screen, the execution of the action string will be
ignored. The softkey ID is case-insensitive.
Example:
$Sanswer$
means pressing the
Answer
soft key.
Yealink IP phones support customizing soft keys. When
invoking a custom soft key, the prefix “#” must be added.
Example: If the custom softkey label is IVR1, the custom
softkey id is custom_macro, then
$S#custom_macro$
means pressing the
IVR1
soft key.
Note
: To view the softkey ID, you can configure the values