Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
384
2.
Select the desired value from the pull-down list of
180
Ring
Workaround
.
3.
Click
Confirm
to accept the change.
Use Outbound Proxy in Dialog
An outbound proxy server can receive all initiating request messages and route them to the
designated destination. If the IP phone is configured to use an outbound proxy server within a
dialog, all SIP request messages from the IP phone will be sent to the outbound proxy server
forcibly.
Note
Procedure
Use outbound proxy in dialog can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Specify whether to use outbound
proxy
in a dialog.
Parameter:
sip.use_out_bound_in_dialog
Web User Interface
Specify whether to use outbound
proxy in a dialog.
Navigate to
:
http://<phoneIPAddress>/servlet?p
=features-general&q=load
To use this feature, make sure the outbound server has been correctly configured on the IP
phone. For more information on how to configure outbound server, refer to
on page
Содержание SIP-T19 E2 T4 Series
