Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
560
Procedure
Initiate an intercom call using BLF DSS key can be configured using the configuration file.
Central
Provisioning
(Configuration
File)
<MAC>.cfg
Configure the IP phone to initiate an
intercom call using BLF DSS key.
Parameter:
features.blf.intercom_mode.enable
Configure the intercom mode.
Parameters:
features.intercom.mode
features.intercom.feature_access_code
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.blf.intercom_mode.enable
0 or 1
0
Description:
Enables or disables the IP phone to initiate an outgoing intercom call with a monitored user
when pressing the BLF DSS key.
0
-Disabled
1
-Enabled
Note:
To use this feature, you also need to configure the intercom mode (configured by
the parameter “features.intercom.mode”). It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
None
Phone User Interface:
None
features.intercom.mode
0 or 1
0
Description:
Configures the intercom mode.
0
-SIP
1
-FAC, the feature access code is configured by the parameter
“features.intercom.feature_access_code”.
Web User Interface:
None
Содержание SIP-T19 E2 T4 Series
