Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 665 / 981

Configuring Advanced Features
643
Variable Value Phone Action
AutoP Perform auto provisioning.
DNDOn
Activate the DND feature.
Note
: For Yealink IP phones, it works only if the
value of the parameter “features.dnd.allow” is
set to 1 (Enabled).
DNDOff
Deactivate the DND feature.
Note
: For Yealink IP phones, it works only if the
value of the parameter “features.dnd.allow” is
set to 1 (Enabled).
number=xxx&outgoing_uri=y
Place a call to xxx from SIP URI y.
Example
:
http://10.3.20.10/servlet?key=number=1234&o
utgoing_uri=1006@10.2.1.48 (1234 means the
number you dial out; 1006@10.2.1.48 means
the SIP URL you dial from.)
OFFHOOK Pick up the handset.
ONHOOK Hang up the handset.
ANSWER/ASW/Asw Answer a call.
Reset Reset a phone.
ATrans=xxx
Perform a semi-attended/attended transfer to
xxx.
BTrans=xxx Perform a blind transfer to xxx.
phonecfg=get[&accounts=x][&dnd=x
][&fw=x]
Get firmware version, registration, DND or
forward configuration information.
The valid value of “x” is 0 or 1, 0 means you do
not need to get configuration information. 1
means you want to get configuration
information.
Note
: The valid URI is:
http(s)://<phoneIPAddress>/servlet?phonecfg
=get[&accounts=x][&dnd=x][&fw=x]
Example
:
http://10.3.20.10/servlet?phonecfg=get[&acco
unts=1][&dnd=0][&fw=1]
CallWaitingOn Activate the call waiting feature.
CallWaitingOff Deactivate the call waiting feature.