Yealink SIP-T19 E2 T4 Series, Руководство администратора

Страница: 715 / 981

Configuring Advanced Features
693
Macro Action Description

go (green; green with outgoing mark for SIP-T48G/S)

o (off)
&L<label> (Optional.): You have to put the “&L<label>”
last in the command flow.
Example:
$LEDg1000o100r300&Lidle$
means an infinite
loop for BLF/BLF list DSS key LED status: illuminates solid
green for 1000ms, goes out for 100ms and then
illuminates solid red for 300ms. At the same time, the
label of the BLF/BLF list DSS key is changed to “idle”.
Note
: The last “color” can be configured without “time”,
and it means permanently displaying the last color until
triggered by other macros. This macro can be only used
for BLF/BLF list feature. For more information, refer to
Configuring BLF LED Status and BLF DSS Key Behavior on
page 543 .
Configuring EDK Feature
To configure EDK list, EDK prompt, EDK soft keys and custom DSS keys, you have to enable EDK
feature. By default, the EDK feature is disabled.
Yealink IP phones support displaying the softkey id or menu item id by long pressing the
Volume Up key. It is especially useful for those users who need to view the softkey id or menu
item id when configuring EDK macros.
The following graphic shows an example for displaying the softkey id and menu item id after
accessing the menu of the phone: