With each bus coupler, to protect the backplane bus connectors,
there is a mounted bus cover in the scope of delivery. You have to
remove the bus cover of the bus coupler before mounting a SLIO
module. For the protection of the backplane bus connector you
always have to mount the bus cover at the last module of your system
again.
The bus cover has the order no. 000-0AA00.
There is the possibility to fix the assignment of electronic and terminal
module. Here coding pins (order number 000-0AC00) from VIPA can
be used. The coding pin consists of a coding jack and a coding plug.
By combining electronic and terminal module with coding pin, the
coding jack remains in the electronic module and the coding plug in
the terminal module. This ensures that after replacing the electronics
module just another electronic module can be plugged with the same
encoding.
2.3 Dimensions
Bus cover
Coding pins
Dimensions CPU
VIPA System SLIO FM 050
Basics and Assembly
Dimensions
HB300 | FM | 050-1BA00 | GB | 15-11
13
