The
terminal module
serves to carry the electronic module, contains
the backplane bus with power supply for the electronic, the DC 24V
power section supply and the staircase-shaped terminal for wiring.
Additionally the terminal module has a locking system for fixing at a
mounting rail. By means of this locking system your SLIO system may
be assembled outside of your switchgear cabinet to be later mounted
there as whole system.
The functionality of a SLIO periphery module is defined by the
elec-
tronic module
, which is mounted to the terminal module by a safe
sliding mechanism. With an error the defective module may be
exchanged for a functional module with standing installation.
At the front side there are LEDs for status indication. For simple
wiring each module shows a corresponding connection diagram at
the front and at the side.
In the System SLIO the power supply is established by power
modules. These are either integrated to the head module or may be
installed between the periphery modules. Depending on the power
module isolated areas of the DC 24V power section supply may be
defined respectively the electronic power supply may be extended
with 2A. For better recognition the colour of the power modules are
contrasting to the periphery modules.
Terminal module
Electronic module
Power module
VIPA System SLIO FM 050
Basics and Assembly
System conception
HB300 | FM | 050-1BA00 | GB | 15-11
11
