Exchange of a module
1.
Chapter 2.6 ‘Wiring’ on page 23
2.
Press the unlocking lever at the lower side of the just mounted
right module and pull it forward.
3.
Turn the locking lever of the module to be exchanged upwards.
4.
Pull the module forward.
5.
For mounting turn the locking lever of the module to be mounted
upwards.
6.
To mount the module put it to the gap between the both
modules and push it, guided by the stripes at both sides, to the
mounting rail.
7.
Turn the locking lever downward again.
8.
Plug again the electronic module, which you have removed
before.
Exchange of a head module (e.g. bus coupler)
VIPA System SLIO FM 050
Basics and Assembly
Demounting and module exchange
HB300 | FM | 050-1BA00 | GB | 15-11
20
