Yamaha TS-S, Руководство пользователя

Страница: 271 / 286

C
Daisy Chain Guide
C-17
3
Select the COM port to connect to the controller.
To transfer data to a currently connected controller, select the "COM port (in use)" (See below.).
When you want to transfer data to a controller other than the currently connected one, either
disconnect the connection or change the node number by performing "Switch Controller" first, and then
execute data transfer again.
Select the "COM port (in use)", and click the [OK] button.
"Data Transfer [PC to Controller]" window
Select COM port
(to transfer data to currently
selected controller).
Click.
24C22-M0-00
4
Select the node number.
If the "Node Select" window appears, select the controller where you want to transfer the data and click
the [OK] button.
If not all controllers are displayed, click the [Research] button.
"Node Select" window
Select controller (node number 5 in this example).
Click.
24C23-M0-00
n
NOTE
If controllers having the same node number are found when "Research" is performed, a message screen appears
asking whether to execute automatic node number assignment. Clicking the [OK] button on that screen will start
automatic node number assignment. If you do not require automatic node number assignment, click the
[Cancel] button.