Yamaha F200B, Руководство по обслуживанию

Страница: 399 / 579

8-36
8
3. Install the original propeller shaft shim
3
and propeller shaft assembly
4
into the
propeller shaft housing assembly
5
.
4. Install the propeller shaft housing assem-
bly, and then tighten the propeller shaft
housing bolts
6
to the specified torque.
5. Install the cover
7
.
6. Install the water inlet covers
8
, and then
tighten the water inlet cover screw
9
to
the specified torque.
7. Install the water pipe 0 and rubber seals
A and B .
Installing the shift rod
1. Install the shift rod. See “Installing the
shift rod” (8-29).
Installing the water pump
1. Install the water pump. See steps 1–3
and 5 in “Installing the water pump” (8-
30).
Checking the lower unit for air
leakage
1. Check the lower unit for air leakage. See
“Checking the lower unit for air leakage”
(8-31).
Installing the lower unit
1. Install the extension (U-transom model),
lower unit, trim tab, and propeller. See
steps 1–7 in “Installing the lower unit” (8-
31).
2. Fill the lower unit with gear oil up to the
proper level. See steps 5–8 in “Changing
gear oil” (10-11).
Propeller shaft housing bolt
6
:
29 N·m (2.9 kgf·m, 21.4 ft·lb)
Water inlet cover screw
9
:
1 N·m (0.1 kgf·m, 0.7 ft·lb)
F N R
1
2
3
4
5
2
7
6
8
9
B
A
0
Drive shaft and lower case (F250G)