Yamaha F200B, Руководство по обслуживанию

Страница: 300 / 579

7-41
POWR
Power unit
TIP:
• When turning the timing belt tensioner,
apply a force of 15 N·m (1.5 kgf·m, 11.1
ft·lb) or less.
• Make sure that the belt position marks are
aligned with the “
L
L L
L
” marks. See steps 6
and 7 in “Removing the timing belt” (7-38).
8. Install the timing belt guides
0
.
9. Turn the crankshaft clockwise 2 full turns
until the marks
p
and
r
are aligned,
and then check that the marks
s
and
t
on the VCT assemblies and driven
sprockets are aligned.
10. Adjust the timing belt guide clearance
u
.
11. Install the wiring harness guide. See
steps 13–37 in “Installing the wiring har-
ness” (7-23).
12. Install the fuel hoses and fuel rail covers.
See steps 7 and 9 in “Installing the fuel
injector” (6-46).
13. Connect the quick connectors. See “Con-
necting the quick connector” (6-8).
14. Install the intake manifold (PORT). See
“Installing the intake manifold” (6-18).
15. Install the intake silencer, and then con-
nect the air temperature sensor coupler
and blowby hose. See “Installing the
intake silencer” (6-19).
0 0
p
r
t
s
Timing belt guide clearance
u
:
0.5–1.5 mm (0.02–0.06 in)
u
u