Yamaha F200B, Руководство по обслуживанию

Страница: 537 / 579

9-62
9
Assembling the trim ram
• When assembling the PTT unit, do not
use a rag. Otherwise, dust and particles
could get on the PTT unit components,
causing poor performance.
• Do not reuse a dust seal or O-ring,
always replace it with a new one.
1. Install the backup ring
1
, a new O-ring
2
, the spring
3
, the adapter
4
, and the
circlip
5
to the trim piston
6
.
2. Install a new dust seal
7
, the circlip
8
,
and a new O-ring
9
to the trim cylinder
end screw
0
, and then install the trim
cylinder end screw
0
onto the trim ram
A
.
Installing the tilt cylinder
• When assembling the PTT unit, do not
use a rag. Otherwise, dust and particles
could get on the PTT unit components,
causing poor performance.
• Do not reuse an O-ring, always replace it
with a new one.
1. Install a new O-ring 1 to the free piston
2 .
2. Push the free piston 2 into the tilt cylin-
der 3 until it bottoms out.
3. Install the tilt cylinder 3 to the PTT body
4 .
4. Install a new O-ring 5 and the pipe joint
adapter 6 , and then tighten the pipe joint
adapter 6 to the specified torque.
5. Install the pipes 7 and 8 , and then
tighten the pipe joints 9 and 0 to the
specified torque.
Tilt piston bolt
I
:
7 N·m (0.7 kgf·m, 5.2 ft·lb)
8
8
B
B
C
C
D
D
E
E
F
F
G
H
I
G
1
2
2
1
3
4
5
6
7
7
8
8
9
9
0
0
A
PTT cylinder