Yamaha CEmarking RCX221, Руководство пользователя

Страница: 432 / 468

9-26
Chapter
9
TROUBLESHOOTING
6.34 : MARK method is not allowed
Code : &H0622
Meaning/Cause : Return-to-origin was attempted with an ORIGIN statement
or dedicated input while the return-to-origin method for an
incremental mode axis or semi-absolute mode axis is set to
"Mark".
Action : Return-to-origin on the incremental mode axis or semi-absolute
mode axis cannot be performed by the mark method. Change
the return-to-origin method.
6.35 : Expression value error
Code : &H0623
Meaning/Cause : The expression value is other than -1 and 0 even though
conditional expression is a numeric expression.
Action : 1. Set the expression value correctly.
2. Change the "TRUE condition" parameter setting.
[ 9] Memory errors
9.1 : Program destroyed
Code : &H0901
Meaning/Cause : a. Part or all of the program data has been destroyed
b. This error message is sometimes issued due to a major error
or the power being turned off during rewrite of program
data.
Action : 1. Delete that program during selection.
2. Initialize the program data.
9.2 : Point data destroyed
Code : &H0902
Meaning/Cause : a. Part or all of the point data has been destroyed
b. This error message is sometimes issued due to a major error
or the power being turned off during rewrite of point data.
Action : Initialize the point data.
9.3 : Memory destroyed
Code : &H0903
Meaning/Cause : Error or malfunction occurred in the memory.
Action : Initialize memory.
9.4 : Parameter destroyed
Code : &H0904
Meaning/Cause : Part or all of the parameter data has been destroyed.
Action : Initialize the parameter data.
[ 9] Memory errors