Yamaha CEmarking RCX221, Руководство пользователя

Страница: 138 / 468

4-70
Chapter
4
OPERA
TION
10. "PROGRAM" mode
10.3.7 Changing the program attribute
Editing and erasing the programs can be prohibited by specifying the program attribute.
There are two program attributes: RW and RO. Each time a change is made a program
attribute is alternately switched.
1. RW (read or write)
Program contents can be edited and erased.
This is automatically specified as a default when a program name is registered.
2. RO (read only)
Program contents cannot be edited or erased.
[Procedure]
1) In "PROGRAM>DIR" mode, use the cursor (
↑
/
↓
) keys to select the program with the
attribute to be changed.
2) Press (ATTRBT) to enter "PROGRAM>DIR>ATTRBT" mode.
A confirmation message appears on the guideline.
■
Changing a program attribute
>DIR>ATTRBT <TEST2 >
No. RW/RO
1 *TEST2 50 907 RW
2 PARTS100 38 843 RW
3 TEST100 100 1968 RW
4 TEST200 80 1525 RW
Change attribute OK?
YES NO
Name Line Byte
PROGRAM
3) Press (YES) to change the program attribute.
Press (NO) if you want to cancel the change.