Yamaha CEmarking RCX221, Руководство пользователя

Страница: 177 / 468

4-109
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.3.2 Pallet definition by teaching
n
NOTE
Pallets cannot be defi ned by teaching if return-to-origin is incomplete.
Perform teaching after performing return-to-origin.
[Procedure]
1) Select the pallet number in "MANUAL>PALLET" mode with the cursor (
↑
/
↓
) keys.
2) Press (METHOD) to enter "MANUAL>PALLET>METHOD" mode.
3) Select the dimension of the pallet to be defined from "2-D" (plane) or "3-D" (solid).
■
Pallet definition by teaching (1)
MANUAL >PALLET>METHOD 50%[MG][S0H0X]
PALLET NO.=PL0 [XY]
Select dimension of this pallet
2-D 3-D
4) Move the robot work point to P[1] used in the pallet definition, and perform teaching
by pressing .
w
WARNING
TO AVOID HAZARDOUS SITUATIONS DO NOT ENTER THE ROBOT MOVEMENT
RANGE WHEN MANIPULATING THE ROBOT.
n
NOTE
• Each pallet is generated (outlined) with 5 points for pallet defi nition.
• Point data in the pallet defi nition must be entered in "mm" units.
• The 5 points should be defi ned in order from P[1] to P[5]. See "11.3
Displaying, editing and setting pallet defi nitions".