Yamaha CEmarking RCX221, Руководство пользователя

Страница: 163 / 468

4-95
Chapter
4
OPERA
TION
11. "MANUAL" mode
11.2.6 Erasing point data
[Procedure]
1) Press (ERASE) in "MANUAL>POINT" mode.
The message "Erase (####-####)>" appears on the guideline.
■
Erasing point data (1)
MANUAL >POINT 50% [MG][S0H0X]
————————————x———————y———————z———————r———
P30 = 100.00 250.00
P31 = 50.00 100.00
P32 = 122.62 -24.54
Erase(####-####)>
COMNT : [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
2) Use to and to specify the point number range in the following format
and press .
"(erase start number) - (erase end number)"
For example, to erase the data between P30 and P34, enter "30-34" and press
.
A confirmation message appears on the guideline.
n
NOTE
Valid point numbers are from 0 to 9999.
■
Erasing point data (2)
MANUAL >POINT 50% [MG][S0H0X]
————————————x———————y———————z———————r———
P30 = 100.00 250.00
P31 = 50.00 100.00
P32 = 122.62 -24.54
(30-34)Erase OK? YES NO
COMNT : [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00
0.00 0.00
3) Press (YES) to erase the data. The point data in the specified range is erased.
Press (NO) if you want to cancel erasure.