Yamaha CEmarking RCX221, Руководство пользователя

Страница: 421 / 468

9-15
Chapter
9
TROUBLESHOOTING
5.16 : WEND without WHILE
Code : &H0510
Meaning/Cause : There is no WHILE statement corresponding to the WEND
statement.
Action : 1. Delete the WEND statement.
2. Add a WHILE statement corresponding to the WEND
statement.
5.17 : WHILE without WEND
Code : &H0511
Meaning/Cause : There is no WEND statement corresponding to WHILE
statement.
Action : 1. Delete the WHILE statement.
2. Add a WEND statement corresponding to the WHILE
statement.
5.18 : NEXT without FOR
Code : &H0512
Meaning/Cause : a. There is no FOR statement corresponding to NEXT statement.
b. NEXT command was executed without executing FOR
command.
Action : 1. Delete the NEXT statement.
2. Add a FOR statement corresponding to the NEXT statement.
3. Confirm execution of FOR command.
5.19 : FOR without NEXT
Code : &H0513
Meaning/Cause : There is no NEXT statement corresponding to FOR statement.
Action : 1. Delete the FOR statement.
2. Add a NEXT statement corresponding to the FOR statement.
5.20 : ENDIF without IF
Code : &H0514
Meaning/Cause : There is no IF statement corresponding to ENDIF statement.
Action : 1. Delete the ENDIF statement.
2. Add an IF statement corresponding to the ENDIF statement.
5.21 : ELSE without IF
Code : &H0515
Meaning/Cause : There is no IF statement corresponding to ELSE statement.
Action : 1. Delete the ELSE statement.
2. Add an IF statement corresponding to the ELSE statement.
[ 5] Robot language syntax (compiling) errors