Yamaha CEmarking RCX221, Руководство пользователя

Страница: 113 / 468

4-45
Chapter
4
OPERA
TION
9. "AUTO" mode
9.9 Break point
An ongoing program can be stopped if a break point is set in the program. This is useful
when debugging the program.
The program execution pauses on the line just prior to a break point. The program
execution will restart from the break point when is pressed.
Valid keys and submenu contents in "AUTO > BREAK" mode are shown below.
Valid keys Menu Function
Cursor key
(
↑
/
↓
)
Specifies the break point and scrolls the screen.
Page key
(
〈〈
/
〈〈
)
Switches the page display.
F1 SET Sets the break point.
F2 CANCEL Deletes the break point.
F3 SEARCH Searches for the line set with the break point.
F6 JUMP Shows the program listing from specified line.
F7 FIND Specifies the character string to be found.
F8 FIND+
Finds the specified character string searching
backwards from the cursor position.
F9 FIND-
Finds the specified character string searching forwards
from the cursor position.
n
NOTE
• Up to 4 break points can be set in one program.
• The to keys have the same functions as edit operation in
"PROGRAM" mode. Refer to "10.2.13 Line jump" and "10.2.14 Searching a
character string" later in this chapter.