Yamaha CEmarking RCX221, Руководство пользователя

Страница: 168 / 468

4-100
Chapter
4
OPERA
TION
11. "MANUAL" mode
2) Use to , and to enter the point number range for the copy
source and the point number for the copy destination in the following format, and
press .
"(copy start number) – (copy end number), (copy destination number)"
For example, to copy the point comments between P7 and P16 onto the lines after
P107, enter "7 - 16, 107" and press .
■
Copying a point comment (1)
MANUAL >POINT>COMMENT 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00
P8 =
P9 = 122.62 -24.54
Copy(####-####,####)>7-16,107_
COMNT : [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00
3) A confirmation message appears on the guideline.
Press (YES) to make a copy. The comments in the selected range are copied
onto the data lines starting from the specified copy destination number.
Press (NO) if you want to cancel the copy.
■
Copying a point comment (2)
MANUAL >POINT>COMMENT 50%[MG][S0H0X]
————————————x———————y———————z———————r———
P7 = 100.00 250.00
P8 =
P9 = 122.62 -24.54
(7-16,107)Copy OK? YES NO
COMNT : [ ]
[POS] 50.00 100.00 0.00 0.00
0.00 0.00
0.00 0.00