Yamaha 40, Руководство по установке

Страница: 160 / 224

151
E
3. Install:
• Cable stopper
1
• Shift cable
2
• Throttle cable 3
• Bolt 4
• Grommet
5
1
2
4
3
5
4. Adjust:
• Shift cable joint position
5. Check:
• Shift operation
Unsmooth operation
→
Adjust.
Adjustment steps:
• Set the shift lever 1 to the neutral posi-
tion.
• Align the center of the set pin
2
with the
mark
a
on the bracket.
• Adjust the position of the cable joint 3
until its hole aligns with the set pin.
• Install the clip
4
, and then tighten the
locknut
5
.
WARNING
The cable joint must be screwed in a
minimum of 8.0 mm (0.31 in).
Checking steps:
• Turn the throttle grip to the fully closed
position.
• Check the shift lever for smooth operation
by shifting the lever from neutral to forward
and reverse.
a
2
8.0 mm (0.31 in)
4
3
5
TillerHandle.book Page 151 Friday, April 12, 2013 3:19 PM