Xo FLOW Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 74

Xo FLOW Скачать руководство пользователя страница 66

XO FLOW – Installation instructions

66

Figure 95 - Adjustment of water flow for cuspidor

6.9.10

Remote desktop

The remote desktop app can be used to interact with another computer connected to the same
network as the unit.

To configure the connection, the XO Remote desktop server software must be installed on the
computer (that should be accessed). Note that this software requires administrative privileges. On the
unit, enter the IP address of the remote computer in the “remote desktop app” section of the
administration app. It is recommended that the remote computer is assigned a static IP address to
avoid connection issues due to the IP having been changed automatically.

Download XO Remote desktop server software here.

See details concerning remote desktop and/or integration with scanners here.

7

CHECK THE INSTALLATION AND FIT THE PANELS

Please follow the check lists below.

Before the panels are fitted:

1.

Place a cup in the cup holder and test the cup filler (if supplied with cup filler).



2.

Check that the cuspidor flush is efficiently rinsing the cuspidor bowl. See 6.9.9 for
adjustment.



3.

Test the suction.



4.

Test that each instrument functions correctly.
Lift each instrument forward and activate the foot control.



5.

Check that all instruments are correctly balanced. See details in 6.1.



«
...
64
65
66
67
68
...
»

Содержание FLOW











































































Отзывы:

Нет отзывов