Xo FLOW, Руководство по установке, Страница: 11 / 74

XO FLOW – Installation instructions
11
•
Water hardness test strips
•
Main’s connector tool – WAGO 890-383
•
Ferrite core tool – Würth 815-0021
•
Test equipment for electrical safety test, see instruction YB-021 for details
4 TRANSPORTATION AND UNPACKING
4.1 Transport and storage
XO FLOW must be transported and stored under the conditions shown below:
Table 3 – Transport and storage conditions
Condition Transport and storage
Temperature -40 o C – +70 o C
Relative humidity 10% – 95%
Air pressure 700 hPa – 1060 hPa
Upon arrival, check that no boxes suffered transportation damage.
Any signs of damage must be noted on the shipping documents and the transport company
/ forwarding agent must be contacted.
If the “shock indicator” attached to the patient chair box has turned red – please unpack
the chair immediately and check that the chair did not suffer any damage!
4.2 Unpacking
XO FLOW is delivered on two pallets, containing 4–7 boxes, depending on the configuration.
Figure 2 – XO FLOW packed in boxes
The boxes contain the following: