Xo FLOW, Руководство по установке, Страница: 19 / 74

XO FLOW – Installation instructions
19
Figure 18 – Unit stand seen from above
7. Turn the adjustment nut – (4) in Figure 18 – counter-clockwise and make sure it does not
contact the bushing in the floor.
8. Turn the adjustment nut – (3) in Figure 18 – until the bridge arm post is horizontal in the
crosswise direction and tighten the nut on top of the long rod.
9. Turn the adjustment nut – (4) in Figure 18 – clockwise until it contacts the bushing in the floor
and tighten the nut on top of the long rod.
10. Turn the adjustment nut – (1) in Figure 18 – clockwise until it contacts the bushing in the floor
and tighten the nut on top of the long rod.
The four adjustment nuts must rest on the bushings in the floor.
The stability of the unit stand will otherwise be compromised!