Xo FLOW, Руководство по установке, Страница: 16 / 74

XO FLOW – Installation instructions
16
Figure 13 – Positioning of the rubber gasket
Figure 14 – Positioning of the two parts
When lifting the unit stand, use the carrying handles – see Figure 15.
Adjust the rubber gasket for accurate positioning under the unit base and the supporting leg.
Place an Ø 8 mm washer – (10) in Figure 10 – and an M8 screw – (9) in Figure 10 – loosely into the
supporting leg.
Insert the four long rods – (5) in Figure 10 – through the four holes of the unit base into the bushings
in the floor and tighten.
Place four Ø 12 washers – (12) in Figure 10 – and M12 nuts – (11) in Figure 10 – loosely on the studs.
See Figure 16 and Figure 17.